64 lines
2.5 KiB
Markdown
64 lines
2.5 KiB
Markdown
# snappy
|
|
|
|
|
|
|
|
*A short description of the keyboard/project*
|
|
|
|
* Keyboard Maintainer: [Philip Gaber](https://github.com/qhga)
|
|
* Hardware Supported: *The PCBs, controllers supported*
|
|
* Hardware Availability: *Links to where you can find this hardware*
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make snappy:default
|
|
|
|
# REV1 & REV2 (elite c)
|
|
sudo make snappy/rev1:default:dfu-split-left
|
|
sudo make snappy/rev1:default:dfu-split-right
|
|
|
|
sudo make snappy/rev2:default:dfu-split-left
|
|
sudo make snappy/rev2:default:dfu-split-right
|
|
|
|
# REV3 (promicro rp2040) (info.json -> CURRENTLY NOT WORKING)
|
|
sudo make snappy/rev3:default:uf2-split-left
|
|
sudo make snappy/rev3:default:uf2-split-right
|
|
|
|
# REV3_5 (promicro rp2040) (WITHOUT info.json)
|
|
sudo make snappy/rev3_5:default:uf2-split-left
|
|
sudo make snappy/rev3_5:default:uf2-split-right
|
|
|
|
# OTHER Layouts (example REV3_5)
|
|
sudo make snappy/rev3_5:qwertz:uf2-split-right
|
|
sudo make snappy/rev3_5:qwertz:uf2-split-left
|
|
|
|
sudo make snappy/rev3_5:$MY_LAYOUT:uf2-split-right
|
|
sudo make snappy/rev3_5:$MY_LAYOUT:uf2-split-left
|
|
|
|
# Make sure to mount the RP2040 drive to /media/snappy for automatic copying of the .uf2 file
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
### REV1 & REV2
|
|
* **Physical Reset Button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in Layout**: Press the key mapped to `QK_BOOT` (REV1 & REV2) if it is available
|
|
|
|
### REV3 (NOT WORKING) & REV3_5
|
|
* **Physical Reset Button**: Hold the `boot` button while plugging in the MC OR hold `boot` and press `reset`
|
|
* **Physical Bootmagic Key**: Hold the `boot` button while plugging in the MC OR hold `boot` and press `reset`
|
|
* **Keycode in Layout**: Press the key mapped to `QK_BOOT` (REV3 & REV3_5) if it is available
|
|
|
|
info.json spec: https://github.com/qmk/qmk_firmware/blob/master/docs/reference_info_json.md
|
|
|
|
### VIA (Troubleshooting)
|
|
|
|
On GNU/Linux while using Chrome to access VIA (https://usevia.app/)
|
|
Navigate to `chrome://device-log` find hidrawXYZ
|
|
|
|
sudo chown $USER:$USER /dev/hidrawXYZ
|
|
|
|
For now we have to upload the `snappy_revXYZ_via_keyboard_definition.json` located in the `/etc/` folder manually to the via website
|